If you ever find yourself in a position where your phone gets wet, you have a few options. This is how to remove water from your iPhone. Turning off the device and dismantling it as much as possible without breaking anything is the first step. Before allowing it to dry for 24 hours, make sure it’s free of any batteries or SIM cards. Replace all of the pieces after the gadget has dried and try turning it on again!
The very worst-case scenario is getting water on your iPhone. Despite having an IP rating (iPhone 7 and later, including the iPhone 12 series), the newest iPhones are not waterproof. If you put your phone in water or submerge it for an extended period of time, water has the ability to harm its internal components, as well as cause other issues. Additionally, if you have an older iPhone, any water on or within the device might cause serious damage. Follow these procedures to remove water from your iPhone’s camera, speaker, or lightning port if it has been submerged in water.
How to Remove Water from Your iPhone (Updated May 2022)
Even if your iPhone has an official IP classification, submerging it in water is not recommended. This is because Apple does not cover water damage under warranty, even for iPhones with an IP rating. So you’ll be on your own if something goes wrong (pun intended).
The lightning port or speaker of the iPhone is regularly saturated with water, resulting in a muffled sound. However, in some cases, water or moisture may be discovered inside the camera lens, making drying it more difficult. The most common cause of an iPhone not charging is water. So, in this article, we’ll show you how to remove water from your iPhone’s Lightning connector, camera lens, and other areas. We’ll also take a look at ways to dry your iPhone with and without rice. Using the table of contents below, you can jump to any chapter of this post.
How to Clean iPhone Speakers and Charging Ports of Water
We’ll start here because this is where the majority of iPhone issues occur. There are a variety of ways to get water out of your iPhone without using rice, including applications, Siri shortcuts, and more. They could aid in the removal of water from your iPhone’s speakers and charging port. Let’s take a look at each one individually.
Related – How to Convert Photo to PDF on iPhone and iPad? Learn Easy Steps in 2022
Try Using Gravity First.
If your iPhone has been damaged by water, the first thing you should do is try to extract it using gravity. While your iPhone is laying on the floor, simply tap on the top of the speaker. A hairdryer can also be used to warm up the bottom of your iPhone and aid in drying it.
/wet-phone-160440298-resized-56a534ff5f9b58b7d0db8093.jpg)
Water droplets stuck inside your iPhone speaker can also be released using the following approach, which allows them to escape through the speaker grill and onto the ground.
To get water out of your speaker, use the Siri Shortcut.
Many of you are probably aware that the Apple Watch features a clever method for removing water from the speaker grilles. Removing the rubber tip from the hose and inserting it into this drain tube is a good idea. You may use your speaker to draw water out, and this method works wonderfully. Surprisingly, there are no built-in solutions on the iPhone. That doesn’t rule out the possibility of creating your own or using Siri shortcuts created by other iPhone users to drain the water from your iPhone speaker. Follow the steps below to get started:
To begin, you must allow suspicious shortcuts to be installed on your iPhone. Allow Untrusted Shortcuts by going to Settings > Shortcuts and checking the box. You must enter your passcode to confirm the activity.
Next, download the Water Eject quick-launch app to your iPhone. This link will allow you to download and install it. To add a forbidden shortcut, go to the Add Shortcut page, scroll to the bottom, and press the Add Untrusted Shortcut button. This is a useful shortcut built by user Josh0678, and if you’re interested, you can find more shortcuts at this site.
From within the Shortcut app, navigate to the My Shortcuts tab. In the menu, select the Water Eject option. To get started, go to the Start menu and select Begin from the drop-down menu. The shortcut will start operating right away. When you press the shortcut, a series of noises should be heard, and water should begin to spray from your speaker.
Use an application to remove water from a speaker.
Using an App, eject water from a speaker
Apps with comparable features to Siri Shortcuts can also be used. You can look into others that perform the same activity if you don’t like Siri Shortcuts or don’t trust a Shortcut developed by an unknown user on the internet. Sonic is the most popular app for removing water from an iPhone speaker.
It’s available for free on the App Store ( Free ).
Start the program when you’ve downloaded it. Sonic makes use of sound waves to help you clean the water out of your iPhone speaker. You can also change the tone of the sound by changing the frequency setting. This determines how often the sound will be played via your speaker, allowing you to experiment with different high- and low-pitched noises to achieve the optimum results.
- After you’ve chosen a frequency, press Play. Stop the sound by tapping on Stop once all of the water has been discharged.
- This app should be able to drain water from your iPhone speakers for you, and it’s completely free to use.
Make use of the internet
- If neither an app nor a Shortcut appeals to you, there are websites that allow you to play sounds to remove water from iPhone speakers.
- Go to this website on your iPhone.
- Tap on the frequency number (by default, it will show 440Hz) and type 165Hz to change the note value.
- To listen to the audio, press the Play button. Any water that has gotten stuck in your iPhone speaker should be easy to remove with this.
Rice can be used to repair a water-damaged iPhone.
Many people swear that rice can be used to cure water damage in devices. I’ve never tried this method and can’t attest to its efficacy. Rice, on the other hand, is a reasonably efficient absorbent, so it may be able to help your water-damaged iPhone to some extent.
The procedure is straightforward. Turn your iPhone off and soak it for 15 minutes in a jar of uncooked rice. Mix it with water to make a paste out of it. Then, fill a saucepan 3/4 full of rice and top with enough water to cover all of the grains. Over medium heat, bring to a simmer. When the rice is done, remove any leftover liquid from the pan and store it in one layer on a cool surface for 2 days.
Some of the moisture from your iPhone should be absorbed by the rice. This method can be used to resolve difficulties such as moisture inside the iPhone camera lens, charging port obstruction, and other similar concerns.
Seal a water-damaged iPhone in Silica Gel to repair it.
Silica gel, on the other hand, is a substance that absorbs a lot of moisture and is used to keep rice hydrated. You’ve probably seen these in store-bought shoe boxes or bags. Silica gel packets, which little yet contain a lot of moisture, prevent dampness damage to your clothes, luggage, shoes, and other possessions.
If you have silica gel on hand, you should try using it to repair your iPhone if it has been damaged by water. Place silica gel packets on top of your iPhone for a few days to see if it helps. This should keep your iPhone from becoming too soaked.
Add to that, Flipkart is offering a 15-day “Love It or Return It” trial period for Samsung’s Galaxy Z Flip 3 and Z Fold 3 for the first time.
Related – Google vs. Apple Maps – A Detailed Summary on the Working in 2022
How to Clean the Lens of an iPhone Camera
Pictures taken with your iPhone’s camera lens become fuzzy and speckled if moisture accumulates inside the lens. It’s also bad news for the longevity of your iPhone.
The most basic method for removing water from your iPhone camera is to bury it in rice or sandwich it between sheets of silica gel. Because many of these cases include a hydrophobic material that helps to keep moisture out, it’s okay to leave them on the phone after it’s been fully charged.
By reading the parts above, you can learn more about how to remove water from the iPhone camera lens. We recommend looking at our related troubleshooting guide if your iPhone camera freezes or displays a black screen.
Bring your iPhone to an Apple Store to get it fixed.
If nothing else seems to work or if you simply want your iPhone evaluated by a professional, you can seek help from an Apple Store or an authorized service center.
If your phone is waterlogged, an Apple Genius or repair technician should be able to help you remove the moisture or water. If something goes wrong with your iPhone, they might be able to fix it. iPhones, on the other hand, have built-in water damage signs, so your repair person will be aware of the problem. It’s pointless to try to keep that information hidden from them.
Home Repairs for a Wet iPhone
Consider drying out your iPhone yourself if you consider yourself a DIY aficionado.
Simply dry out the insides of your iPhone’s body, not just the charging port or speaker. If you used tap water, you might also add bleach powder or drain less regularly. You’ll also be performing much better than using rice or silica gel if you clean it correctly.
When you’re not using your iPhone, it’s better to turn it off. Any battery loss is irreversible if you leave your phone on all the time. To extend the life of your iPhone, turn it off when not in use. Please bear in mind that if you open up your iPhone first and then wrap it in silica gel, it will function much better.
We also want to warn you that turning off your iPhone voids your warranty. Disable Find My iPhone. Remote erasing is disabled as a result of this setting. If you’re not sure how to do it, wait until the warranty on your iPhone has expired or you’re confident with your iPhone tool abilities.
How to Save Your iPhone in an Inappropriate Water Damage Situation
It might be frustrating to lose your iPhone due to water damage since you may feel powerless. Furthermore, even with more contemporary IP-rated iPhones, there’s no guarantee that your iPhone will withstand any type of water exposure. If your iPhone has been exposed to water, look for dampness in the Lightning connector and speakers. Don’t be alarmed if you find water in your iPhone; it isn’t yet short-circuiting.
So, how do you get water out of the speaker, charging port, and camera of your iPhone? Have you tried the rice technique or employed sound apps to fix a water-damaged iPhone before? Did you find that silica gel worked better for you, or that the process you utilized worked well? Leave your thoughts in the comments section below.